Ways to Prevent Mold Damage to Your Home

10/3/2024 (Permalink)

Mold growth CAN be prevented if you take the appropriate steps...

Mold is everywhere – indoors, outdoors, and even on the evening news! There is a lot of concern over mold in our environment, and how it can impact us and our families.  Here are the top 10 things the EPA feels everyone should know about mold:

1. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.
2. If mold is a problem in your home or school, you must clean up the mold and eliminate sources of moisture.
3. Fix the source of the water problem or leak to prevent mold growth.
4. Reduce indoor humidity (to 30-60%) to decrease mold growth by:
   1. Venting bathrooms, dryers and other moisture-generating sources to the outside
   2. Using air conditioners and de-humidifiers
   3. Increasing ventilation
   4. Using exhaust fans whenever cooking, dishwashing and cleaning
5. Clean and dry any damp or wet building materials and furnishings within 24-48 hours to prevent mold growth.
6. Clean mold off hard surfaces with water and detergent, and dry completely. Absorbent materials such as ceiling tiles, that are moldy, may need to be replaced.
7. Prevent condensation: Reduce the potential for condensation on cold surfaces (i.e., windows, piping, exterior walls, roof, or floors) by adding insulation.
8. In areas where there is a perpetual moisture problem, do not install carpeting (i.e., by drinking fountains, by classroom sinks, or on concrete floors with leaks or frequent condensation).
9. Molds can be found almost anywhere; they can grow on virtually any substance, providing moisture is present. There are molds that can grow on wood, paper, carpet, and foods.

If you do see, or even suspect mold, in your home, do not hesitate to call your Mold Remediation Specialists at SERVPRO® today at 541-745-2097!